Abstract Dentists are exposed to contamination by SARS-CoV-2 due to dental interventions, leading to a state of alert and potential risk of negative impact in mental health and sleep quality, associated with Temporomandibular Disorder (TMD) and bruxism. Objective: to evaluate the psychosocial status, sleep quality, symptoms of TMD, and bruxism in Brazilian dentists (DSs) during the COVID-19 pandemic. Methodology: The sample (n=641 DSs) was divided into three groups (quarantined DSs; DSs in outpatient care; and frontline professionals), which answered an electronic form containing the TMD Pain Screening Questionnaire (Diagnostic Criteria for Temporomandibular Disorders – DC/TMD), the Pittsburgh Sleep Quality Index (PSQI), the Depression, Anxiety and Stress Scale (DASS-21), and the sleep and awake bruxism questionnaire. ANOVA test and Mann Whitney post-test were used, with Bonferroni adjustment (p<0.016) and a 95% confidence level. Results: Probable TMD was found in 24.3% (n=156) of the participants, while possible sleep and awake bruxism were diagnosed in 58% (n=372) and 53.8% (n=345) of them, respectively. Among all variables evaluated, only symptoms of depression were significantly greater in the quarantined DSs group when compared to those who were working at the clinical care (p=0.002). Working DSs were significantly less likely (OR=0.630, p=0.001) to have depressive symptoms. Those who were not worried or less worried about the pandemic were less likely to experience stress (OR=0.360), anxiety (OR=0.255), and poor sleep quality (OR=0.256). Sleep had a strong positive and moderate correlation with psychological factors on frontline workers and DSs in outpatient care, respectively. Conclusion: The results suggest confinement may have a more negative impact on the life of DSs than the act of being actively working. The concern about Covid-19 and poor sleep quality was significantly prevalent and may negatively affect the quality of life of DSs. Thus, further research on the topic is needed.

Resumo O objetivo deste estudo foi avaliar a perda óssea peri-implantar de implantes Hexágono Externo (HE) e Cone Morse (CM) em usuários de sobredentaduras mandibulares com carga imediata por um período de acompanhamento de 1 ano. Este é um ensaio clínico controlado não randomizado que inclui 18 CM e 22 HE. Radiografias periapicais foram obtidas na instalação das sobredentaduras e 1 ano após. A perda óssea peri-implante foi avaliada através da digitalização e análise das radiografias no software Corel DRAW X7. Para tal, a medição foi feita da plataforma dos implantes até a crista óssea nas faces mesiais e distais de cada implante. Os resultados mostraram alta taxa de sucesso nos grupos HE (100%) e CM (94,4%). Para os níveis ósseos peri-implantes, foi encontrada diferença significativa entre os grupos (p = 0,032) e maior perda óssea foi observada no grupo HE. Em média, a perda óssea foi de 0,85 mm (±0,82) para HE e de 0,10 mm (±1,0) para CM. Concluiu-se que uma maior perda óssea ocorreu no grupo HE em comparação com o grupo CM após um acompanhamento de 1 ano.

Abstract The aim of this study was to evaluate the peri-implant bone loss of External Hexagon (EH) and Morse Taper (MT) implants in patients wearing immediately loaded mandibular overdentures during a 1-year follow-up. This is a non-randomized controlled clinical trial including 18 MT and 22 EH implants. Periapical radiographs were taken after overdentures insertion and following 1 year. The peri-implant bone loss was assessed through digitalization and analysis of the radiographs in the software Corel DRAW X7. For this, measurement from implant platform to residual ridge at mesial and distal surfaces of each implant was conducted. The results showed high success rate in the groups EH (100%) and MT (94.4%). For peri-implant bone levels, it was found significant difference between the groups (p=0.032) and greater bone loss was observed in the group EH. In general, bone loss was 0.85mm (±0.82) for EH and 0.10mm (±1.0) for MT. It was concluded that greater bone loss occurred in the group EH in comparison to the group MT after a 1-year follow-up.

Abstract The aim of this non-randomized controlled clinical trial was to evaluate the oral health-related quality of life and masticatory efficiency of patients rehabilitated with mandibular two-implant overdentures with immediate loading or conventional dentures. Fifty completely edentulous patients wearing bimaxillary conventional dentures, for at least one year, were recruited. The patients were then assigned to either two treatment groups: mandibular overdentures supported by two implants with bar-clip system and a maxillary conventional denture (n = 25), and new maxillary and mandibular conventional complete dentures (n = 25). Masticatory efficiency and oral health-related quality of life were assessed before and 3 months after denture insertion. The Brazilian version of OHIP-Edent questionnaire was used to assess the oral health-related quality of life. Masticatory efficiency was evaluated with chewing capsules through a colorimetric method. The results revealed fewer oral health–related quality of life problems in patients wearing mandibular two-implant overdentures compared to the conventional dentures group. In addition, the implant overdenture group presented statistically significant improvement in masticatory efficiency (p = 0.001). There was no correlation between masticatory efficiency and OHIP in the implant group (p > 0.05), however a correlation was found in the conventional denture group (p < 0.05). Therefore, these short-term results suggest that mandibular overdenture retained by 2 implants with immediate loading combined with maxillary conventional dentures provide better masticatory efficiency and oral health–related quality of life than mandibular conventional dentures.

O objetivo desta pesquisa foi avaliar a passividade através da medição da tensão induzida e adaptação passiva em infra-estruturas parafusadas sobre pilares, confeccionadas por tecnologia CAD/CAM, e comparar estas amostras com peças fabricadas por fundição convencional. Usando a tecnologia de CAD/CAM, quatro amostras foram feitas em zircônia (ZirCAD) e quatro amostras foram fabricados em cobalto-cromo (CoCrcad). Os grupos controle foram quatro espécimes de cobalto-cromo, feitos por fundição em monobloco (CoCrci), totalizando 12 infra-estruturas. Para avaliar a adaptação passiva, a diferença vertical entre a infraestrutura e o pilar protético foi medido em microscopia eletrônica de varredura (250 ×) quando apenas um parafuso foi apertado. A tensão média nestas infraestruturas foi analisada através do teste de fotoelasticidade. Foi observada uma diferença significativa na passividade entre os grupos controle e demais amostras. CoCrcad exibiu melhor valor de adaptação passiva (48,76±13,45 mm) e CoCrci o pior (187,55±103,63 mm), Zircad apresentou um valor intermediário (103,81±43,15 µm). Quando comparado com os outros grupos, CoCrci apresentou a maior tensão média ao redor dos implantes (17,19±7,22 kPa). Concluiu-se que a tecnologia CAD/CAM exibiu maior passividade em comparação com as infraestruturas confeccionadas pela técnica convencional. Infraestruturas confeccionadas em Co-Cr através do CAD/CAM apresentaram maior adaptação passiva em comparação com as amostras confeccionadas por CAD/CAM em zircônia. Entretanto, níveis de estresse similares foram obtidos para as estruturas fabricadas por CAD/CAM.

The objective of this research was to evaluate the passivity by measuring the passive fit and strain development of frameworks screwed on abutments, made by CAD/CAM technology, and to compare these parts with samples manufactured by conventional casting. Using CAD/CAM technology, four samples were made from zirconia (Zircad) and four samples were manufactured from cobalt-chrome (CoCrcad). The control groups were four specimens of cobalt-chrome, made by one-piece casting (CoCrci), with a total of 12 frameworks. To evaluate the passive fit, the vertical misfit at the abutment-framework interface was measured with scanning electron microscopy (250×) when only one screw was tightened. The mean strain in these frameworks was analyzed by photoelasticity test. A significant difference in the passive fit was observed between the control and sample groups. CoCrcad exhibited the best value of passive fit (48.76±13.45 µm) and CoCrci the worst (187.55±103.63 µm); Zircad presented an intermediate value (103.81±43.15 µm). When compared to the other groups, CoCrci showed the highest average stress around the implants (17.19±7.22 kPa). It was concluded that CAD/CAM-fabricated frameworks exhibited better passivity compared with conventionally fabricated frameworks. CAD/CAM-fabricated Co-Cr frameworks may exhibit better passive fit compared with CAD/CAM-fabricated zirconia frameworks. Even so, similar levels of stress were achieved for CAD/CAM-fabricated frameworks.

Introdução:A Síndrome da Combinação (SC) é uma condição patológica associada aos pacientes usuários de prótese total maxilar e prótese parcial removível (PPR) mandibular.Objetivo:Observar e mensurar a prevalência dos sinais da Síndrome da Combinação encontrados em pacientes usuários de prótese total maxilar na presença ou ausência de PPR mandibular (Classe I de Kennedy); e averiguar uma possível associação entre a utilização de PPR e a prevalência dos sinais clínicos da síndrome.Material e método:A amostra foi composta por 62 pacientes atendidos no Departamento de Odontologia da Universidade Federal do Rio Grande do Norte (UFRN). O exame clínico intrabucal foi realizado para a verificação da presença ou ausência dos sinais clínicos específicos da Síndrome da Combinação, descrita por Kelly (1972): reabsorção óssea na região anterior da maxila, aumento das tuberosidades, hiperplasia papilar palatina, extrusão dos dentes naturais inferiores anteriores e reabsorção óssea posterior mandibular (variáveis dependentes). Para determinação da associação entre as variáveis dependentes e independentes (uso de PPR inferior e tempo de edentulismo superior), foi utilizado o teste qui-quadrado com significância de 95%.Resultado:A característica mais frequente foi a presença de reabsorção mandibular (93,5%). Quanto à associação entre o uso de PPR inferior e as características da Síndrome da Combinação, só houve diferença estatisticamente significativa entre portadores e não portadores de PPR com relação à extrusão dos dentes inferiores anteriores (p = 0,045).Conclusão:Dentro das limitações deste estudo, verificou-se que os sinais clínicos da Síndrome da Combinação foram bastante prevalentes, e não foi observada associação entre o uso de PPR e as características da Síndrome.

Introduction:Combination Syndrome (CS) is a pathological condition observed in maxillary complete denture (CD) and mandibular removable partial denture (RPD) wearers.Purpose:The aim of this study was to observe and measure the prevalence of CS signs in treatment-seeking wearers of maxillary CD associated or not with RPD (mandibular Kennedy Class I). The association between RPD wearing and the number of CS clinical signs was also evaluated.Material and method:The sample included 62 patients seen at the Department of Dentistry, Federal University of Rio Grande do Norte (UFRN). A clinical oral examination was conducted to assess the presence of specific clinical signs of CS as described by Kelly (1972): bone resorption in the maxillary anterior region, tuberosity overgrowth, palatal papillary hyperplasia, extrusion of mandibular anterior teeth and bone resorption in the mandibular posterior region. The chi-square test at the 95% level of significance was used to test the association between dependent and independent variables.Result:Mandibular resorption was the most frequent complication (93.5%). There was a statistically significant difference between RPD wearers and non-wearers with regard to extrusion of mandibular anterior teeth (p = 0.045).Conclusion:Within the limitations of the present study, a high prevalence of CS clinical signs was observed, but no association between RPD wearing and syndrome characteristics was found.

A terapia Watsu é uma técnica de terapia aquática para relaxamento realizada individualmente em piscina aquecida com música em ambiente tranquilo e harmonioso, envolvendo movimentos rotacionais, alongamento, trações nas articulações e pressões em pontos de tensão muscular. Este estudo avaliou o efeito da terapia Watsu nos aspectos psicológicos (ansiedade e distúrbios psiquiátricos menores) e a qualidade de vida de uma paciente com disfunção temporo-mandibular. A paciente respondeu a três questionários: Inventário de Ansiedade - Resumido - Estado e Questionário de Saúde Geral para avaliar ansiedade e distúrbios psiquiátricos menores, respectivamente e; o Questionário de Qualidade de Vida da Organização Mundial de Saúde. A terapia Watsu foi usada em paciente com disfunção temporo-mandibular, como dor miofascial diagnosticada pelos Critérios de diagnóstico em pesquisa para Disfunção Temporo-mandibular. Os aspectos psicológicos e qualidade de vida foram avaliados antes e após a terapia Watsu. Os resultados após o tratamento mostraram melhora relevante e significativa em todos os índices avaliados. Portanto, pode-se concluir que a terapia Watsu foi eficaz na redução de ansiedade e distúrbios psiquiátricos menores, bem como melhora da qualidade de vida em paciente com disfunção temporo-mandibular.

Watsu therapy is a water relaxation intervention technique performed individually in a warm pool with music and peaceful settings involving harmonious rotational movements, stretching, tractions on the joints and pressures at the points of muscle tension. This study evaluated the effect of Watsu therapy on psychological aspects (anxiety and minor psychiatric disorders) and on the quality of life of a patient with temporomandibular disorders. The patient answered three questionnaires: STAI (State-Trait Anxiety Inventory) and GHQ (Goldberg Health Questionnaire) to assess anxiety and psychiatric disorders respectively, and WHOQOL- Brief (World Health Organization Quality of Life) to assess quality of life. Watsu therapy has been used in patients with temporomandibular disorders (TMD) such as myofascial pain diagnosed by RDC/TMD (Research Diagnostic Criteria for Temporomandibular Disorders). Psychological aspects and quality of life were assessed before and after Watsu therapy. The results after treatment showed relevant and significant improvement on all indices evaluated. Therefore, it was shown that Watsu therapy was effective in reducing anxiety and minor psychiatric disorders, as well as improved quality of life of patients with temporomandibular disorder.

This systematic review evaluated the influence played by the number of implants on the results of rehabilitation treatment with mandibular overdentures on 2 or 4 implants. The literature search was conducted using PubMed, Embase and Cochrane databases. Specific terms were used in performing a search from January 1980 to January 2013. The search strategy was applied by two reviewers who extracted the data and compared the results. Discrepancies were resolved by discussion. Great heterogeneity was seen among the selected studies, in regard to survival rates, prosthesis failure and function rates. A medium degree of quality and methodological consistency was found in one study, and no studies showed a high degree. When considering the prosthesis success rate for 2 implants, there was a variation of 23% to 100%. However, when considering the survival rate, the result was 92% to 100%. For 4 implants, prosthesis survival rates showed less variation, i.e., 97.7% to 100%. Ball attachments were the most common type of abutment for 2 implants; however, there was a higher prevalence of bar abutments for 4 implants. Rehabilitations with 2 implants showed more complications and required more maintenance according to the connection type. Given the limitations of this review, mandibular overdentures with 4 implants showed better results with respect to survival and success rates, especially those with a bar connection. Further studies comparing these two treatment types are necessary to improve the scientific evidence in this area.

The aim of this study was to associate minor psychiatric disorders (general health) and quality of life with temporomandibular disorders (TMD) in patients diagnosed with different TMD classifications and subclassifications with varying levels of severity. Among 150 patients reporting TMD symptoms, 43 were included in the present study. Fonseca's anamnestic index was used for initial screening while axis I of the Research Diagnostic Criteria for Temporomandibular Disorders (RDC-TMD) was used for TMD diagnosis (muscle-related, joint-related or muscle and joint-related). Minor psychiatric disorders were evaluated through the General Health Questionnaire (GHQ) and quality of life was assessed using the World Health Organization Quality Of Life-Brief Version (WHOQOL-BREF). An association was found between minor psychiatric disorders and TMD severity, except for stress. A stronger association was found with mild TMD. Considering TMD classifications and severity together, only the item "death wish" from the GHQ was related to severe muscle-related TMD (p = 0.049). For quality of life, an association was found between disc displacement with reduction and social domain (p = 0.01). Physical domains were associated with TMD classifications and severity and the association was stronger for muscle and joint-related TMD (p = 0.37) and mild TMD (p = 0.042). It was concluded that patients with TMD require multiple focuses of attention since psychological indicators of general health and quality of life are likely associated with dysfunction.

Post-poliomyelitis syndrome (PPS) is characterized by the delayed appearance of new neuromuscular symptoms in patients several years after their acute poliomyelitis paralysis. Clinical features of PPS include fatigue, joint and muscle pain, new muscular weakness and bulbar symptoms. The diagnosis is essentially clinical after excluding other neurological, orthopedic or rheumatologic problems. Temporomandibular disorders (TMD) are usually diagnosed by means of comprehensive review of patient history and clinical examination and the symptoms are pain/ discomfort in the jaw, mainly in the region of the temporomandibular joints (TMJs) and/or masticatory muscles, limitation of mandibular function and/or TMJ sounds. In the same way as PPS, the diagnosis of TMD is challenging. This study reports the case of a patient that presented the symptoms of both conditions in the stomatognathic system, and discusses how to achieve the differential diagnosis for proper management of the cases.

Este estudo tem como objetivo comparar o ajuste vertical e a passividade de infraestruturas em monobloco confeccionadas em 3 diferentes materiais: titânio comercialmente puro (Ti cp - G1), cobalto-cromo (Co-Cr - G2) e níquel-cromo-titânio (Ni-Cr-Ti - G3). Quinze infraestruturas foram obtidas simulando barras para próteses fixas em um modelo com 5 implantes. O ajuste vertical e a passividade da interface da infraestrutura foram medidos usando um microscópio óptico (30×). Os dados foram analisados estatisticamente por meio da ANOVA e teste LSD (α=0,05). A média dos valores e o desvio-padrão da passividade e do ajuste vertical estão apresentados respectivamente: Ti cp [472,49 (109,88) μm e 29,9 (13,24) μm], Co-Cr [584,84 (120,20) μm e 27,05 (10,30) μm], Ni-Cr-Ti [462,70 (179,18) μm e 24,95 (11,14) μm]. Para o desajuste vertical, não houve diferença significante entre o Ti cp e as ligas Co-Cr e Ni-Cr-Ti (p=0,285). Para passividade, não houve diferença significante entre Ti cp e Ni-Cr-Ti (p=0,844), mas ambos foram estatisticamente diferentes do Co-Cr (p=0,028 e p=0,035, respectivamente), o qual apresentou os piores resultados. Pode-se concluir que os materiais utilizados para confecção das infraestruturas não influenciaram o ajuste vertical e que infraestruturas fundidas em monobloco resultaram em inadequados ajustes passivos. A liga de Co-Cr apresentou os piores resultados para a passividade.

This study compared vertical and passive fit of one-piece cast frameworks made with 3 different materials: commercially pure titanium (CP Ti - G1), cobalt-chromium alloy (Co-Cr - G2) and nickel-chromium-titanium alloy (Ni-Cr-Ti - G3). Fifteen frameworks were obtained simulating bars for fixed prosthesis in a model with 5 implants. The passive and vertical fit of the framework interface was measured using an optical microscope at ×30 magnification. Data were statistically analyzed by ANOVA and LSD tests (α=0.05). Mean and standard deviation values for passive fit and vertical fit were, respectively: G1 [472.49 (109.88) µm and 29.9 (13.24) µm], G2 [584.84 (120.20) µm and 27.05 (10.30) µm], and G3 [462.70 (179.18) µm and 24.95 (11.14) µm]. For vertical fit, there were no significant differences among G1, G2 and G3 (p=0.285). There were no significant differences for passive fit between G1 and G3 (p=0.844), but both differed significantly from G2 (p=0.028 and p=0.035, respectively), which showed the highest misfit values. It may be concluded that the vertical fit of frameworks was not affected by the tested materials, and that one-piece cast frameworks resulted in inadequate passive fit. The Co-Cr alloy presented the worst values for passive fit.

Este trabalho teve como objetivo correlacionar o nível de desajuste vertical pilar/implante a perda do torque aplicado (destorque). Um modelo de trabalho foi obtido a partir de uma matriz metálica com cinco implantes tipo hexágono externo (Titamax, Neodent, Curitiba, Brasil) com plataforma regular (4,1 mm). Sobre esta matriz, quatro infra-estruturas foram enceradas utilizando pilares tipo UCLA e fundidas em monobloco com titânio comercialmente puro (Tritan grau I, Dentaurum, Alemanha). Os desajustes foram analisados com um microscópio óptico comparador (Mytutoyo, Japão) após torque de 20 Ncm. O maior valor de desajuste observado por pilar foi utilizado. O valor do torque de desaperto, avaliado com um torquímetro digital (TQ-680, Instrutherm, Brasil), foi calculado em porcentagem do valor do torque inicial (100%) dado aos parafusos protéticos. O teste de correlação de Pearson (p<0,05), entre os valores de desajuste (29,08 ± 8,78 µm) e as porcentagens da perda de torque (50,71 ± 11,37%), não mostrou correlação estatisticamente significante (p=0,295) entre tais fatores. Dentro das limitações do estudo, pode ser concluído que não necessariamente grandes valores de desajustes verticais implicarão em grades perdas de torque.

This study investigated whether there is a direct correlation between the level of vertical misfit at the abutment/implant interface and torque losses (detorque) in abutment screws. A work model was obtained from a metal matrix with five 3.75 x 9 mm external hex implants with standard platform (4.1 mm). Four frameworks were waxed using UCLA type abutments and one-piece cast in commercially pure titanium. The misfit was analyzed with a comparator microscope after 20 Ncm torque. The highest value of misfit observed per abutment was used. The torque required to loose the screw was evaluated using a digital torque meter. The torque loss values, measured by the torque meter, were assumed as percentage of initial torque (100%) given to abutment screws. Pearson's correlation (α=0.05) between the misfit values (29.08 ± 8.78 µm) and the percentage of detorque (50.71 ± 11.37%) showed no statistically significant correlation (p=0.295). Within the limitations of this study, it may be concluded that great vertical misfits dot not necessarily implies in higher detorque values.

Bruxism is a pathological activity of the stomatognathic system that involves tooth grinding and clenching during parafunctional jaw movements. Clinical signs of bruxism are mostly related to dental wear and muscular and joint discomforts, but a large number of etiological factors can be listed, as local, systemic, psychological and hereditary factors. The association between bruxism, feeding and smoking habits and digestive disorders may lead to serious consequences to dental and related structures, involving dental alterations (wear, fractures and cracks), periodontal signs (gingival recession and tooth mobility) and muscle-joint sensivity, demanding a multidisciplinary treatment plan. This paper presents a case report in which bruxism associated with acid feeding, smoking habit and episodes of gastric reflow caused severe tooth wear and great muscular discomfort with daily headache episodes. From the diagnosis, a multidisciplinary treatment plan was established. The initial treatment approach consisted of medical follow up with counseling on diet and smoking habits and management of the gastric disorders. This was followed by the installation of an interocclusal acrylic device in centric relation of occlusion (CRO) for reestablishment of the occlusal stability, vertical dimension of occlusion, anterior guides and return to normal muscle activity (90-day use approximately). After remission of initial symptoms, oral rehabilitation was implemented in CRO by means of full resin composite restorations and new interocclusal device for protection of restorations. Satisfactory esthetics, improved function and occlusal stability were obtained after oral rehabilitation. The patient has attended annual follow-ups for the past 2 years. The multidisciplinary treatment seems to be the key for a successful rehabilitation of severe cases of dental wear involving the association of different health disorders.

Um ajuste inadequado na interface pilar/implante pode gerar problemas mecânicos e biológicos. Etapas laboratoriais podem induzir a um desajuste em tal interface quando pilares do tipo UCLA calcináveis são utilizados. Este estudo propôs-se a avaliar comparativamente o desempenho de três laboratórios de prótese dentária (Labs A, B e C) pela análise do ajuste vertical de pilares UCLA calcináveis durante o processo de fundição e solda de uma mesma prótese. Quatro próteses fixas foram confeccionadas por cada laboratório utilizando pilares do tipo UCLA calcinável. A avaliação foi feita em microscopia eletrônica de varredura sob aumento de 500 x nas faces mesial e distal de cada elemento da prótese, totalizando 24 medidas por laboratório. Os resultados foram analisados estatisticamente pelo teste de Kruskal-Wallis (p<0,05). Na fundição, os valores apresentados pelos laboratórios diferiram estatisticamente (p=0,004). Após a análise da solda, os valores não apresentaram diferença significante entre os laboratórios (p=0,948). Pode-se concluir que os valores de ajuste obtidos no estágio de fundição de pilares UCLA, podem ser influenciados quando processados por diferentes laboratórios e que o processo de solda convencional, por si só, aumenta o grau de desajuste da infra-estrutura, independente do laboratório que a realizou.

An inadequate fit at the abutment/implant interface can generate mechanical and biological problems. The laboratorial stages could induce misfit in such interface when the castable UCLA abutment type is used. The purpose of this study was to comparatively evaluate the performance of three prosthetic laboratories (Labs A, B and C) by vertical fit analysis of castable UCLA abutments on the casting and soldering stages of the same prosthesis. Four fixed prostheses were built by each laboratory using castable UCLA abutments. The evaluation was made by scanning electron microscopy under 500x magnification in the mesial and distal regions of each element of the prosthesis, totalizing 24 measurements per laboratory. The results were analyzed statistically by Kruskal-Wallis test (p<0.05). In the casting process, the values presented by the laboratories differed significantly to each other (p=0.004). After soldering, the values presented by the laboratories showed no significant difference (p=0.948). It may be concluded that the fit values obtained in the casting stage of UCLA abutments can be influenced when processed by different laboratories, and that conventional soldering itself increased the degree of framework misfit, regardless of which laboratory made it.